1. ECM must be completely powered down. Totalnie wyłączone ECU - wyświetlacz jest OFF
2. Transmission in PARK. PARK to zrozumiałe
3. Turn the Ignition Switch ON. Przycisk zapłonu ON i stacyjka na ON
NOTICE: Engine must NOT be running. Bez rozrusznika - silnik wyłączony
Now the following steps must be done in this order in 4 seconds or less:
W ciągu 4 sekund:
1. Press the Override Button. Przycisk Overide wcisnąć
2. Press the Brake Pedal. Wcisnąć pedał nożnego hamulca
3. Release the Brake Pedal. Puścić pedał nożnego hamulca
4. Release the Override Button.
5. Press the Brake Pedal.
6. Release the Brake Pedal.
7. Press the Override Button.
8. Press the Brake Pedal.
9. Release the Brake Pedal.
10. Release the Override Button.
11. Turn Ignition Switch to OFF and Allow to Power All the Way Down. Wyłączyć wszystko tak by zgasł wyświetlacz.
-- dodano 26.09.2012 22:46 --Jak nie zapomnę to sprawdzę czy to naprawdę działa, mam komputer, więc mogę szybko podejrzeć